Audio Basic
Posts: 3507
I love YaBB 1 Gold!
 
|
 |
New Shipment: TELOS AUDIO GNR MINI V3.1
« on: July 4th, 2018, 5:07pm »
|
|
Dear Friends,
Long awaiting new shipment of TELOS Audio GNR MINI has arrived.
After a long term research by Telos Audio Design founder Jeff Lin. Telos has found some way to make GNR performs much better than it used to be. Which is Version 3.1 upgrade.
For the version 3.1 upgrade, We are doing parts specially selection, By a high accurate way(similar to what FM acoustic does) And this takes effort by only two engineers with such ability. And by this way, we can only have 1 part being approved out of 16 parts (1/16 chance) This takes many times and we will drop all the unselected parts. Which is where the costs from. Until now, we have purchased more than 10,000 parts and select one by one. only hundreds of parts are been selected.
Grounding facility has always been there for the sole purpose of safety.
For example, shock hazard prevention, lightning protection, noise shielding and other functions. In an audio setup, the effectiveness of the grounding facility has an immediate impact on the background noise. This translates to poor sound quality and greatly worsens the listening experience.
Present Situation
It is almost impossible to get satisfactory grounding facility, let alone one that meets the requirements for audio use. Most of the time, they only adhere to the minimum safety requirements. The common ones have the Neutral wire and the Ground wire connected together, or there is no Ground on the receptacles, leaving the Ground wire unconnected. This allows noise from the home appliances to pollute the Neutral wire, hence, causing interference.
Electrical appliances like inverter air conditioner and those with switching power supplies, like computer, generate the highest level of interference. When the electrical reference point is polluted with noise, it could get into the signal path and you could hear it as noise. The noise could potentially enter the digital circuit and cause bit error.
TELOS GNR Active Grounding Box
Due to the above limitations, TELOS brings new meaning to grounding implementation. And this has been proven to be the most elegant way for any audio setup. TELOS technical team analyzes audio equipment from a unique perspective. Every audio equipment uses power transformer in order to operate at the correct internal voltage. Hence, each equipment is said to have the primary side and secondary side. The primary side is from the power receptacle, all the way to the input of the transformer. The secondary side is from the output of the transformer to the circuit board. The audio circuitry remains within the secondary side.
TELOS technical team proposes the use of CPU within the GNR to calculate and generate high precision Ground reference voltage. Grounding is achieved by connecting the audio equipment to the binding posts of TELOS GNR that carry the Ground reference voltage. By doing so, GNR is able to truly correct the Ground reference point for the equipment chassis, audio circuitry and the Ground connection.
Using the same analogy as a high precision digital clock, GNR generates low distortion Ground reference voltage, giving each equipment a consistent reference point. When the audio setup is operating on a singular Ground potential, the signal transmission becomes least impeded, avoiding any transmission loss due to polarity mismatch and bit error. Therefore, truly achieving the best transmission possible.
TELOS GNR Active Grounding Box comes with Ground cables of the same materials. Thus each equipment is having the same grounding impedance characteristics, this greatly reduces the likelihood of coloration. By having an isolated Ground for your audio setup, the effect is as good as having a dedicated power line. Through the GNR generated Ground potential serving only your audio setup, noise will be totally isolated.
Seliing Price @ $2100.
Audio Basic
1 Coleman Street
#02-12 The Adelphi.
Tel : 6338 3245
|
Author
Logged